Drivers Hokuyo Automatic Port Devices



Drivers-->

This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.

Connect your headset to a USB port on your computer, and the drivers will install automatically. Wireless (Bluetooth, or with a USB receiver or dock) Your Logitech wireless headset doesn't require any drivers or software, other than the default device drivers built into your operating system. Update / Install / Download Driver. All Medion drivers – including many other drivers for your computer such as Asus, Fujitsu FSC, HP, Dell, IBM, Samsung, Lenovo, Apple, Epson, Sony, AMD, Toshiba and devices or hardware such as USB, printers, network, monitors, scanners – our SecuPerts Driver Updater offers all this easily, step by step.

Original product version: Windows 10, version 1703
Original KB number: 4021854

Drivers Hokuyo Automatic Port Devices

Symptom

When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.

Cause

This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.

This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.

Resolution

To fix this issue, use one of the following methods.

Method 1

To resolve this issue, install update 4022716.

Method 2

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.

Method 3

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.

Note

See the device manufacturer's user guide for specific instructions about how to install the driver.

Method 4

If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:

Download
  1. Install the device-specific driver (see Method 2).
  2. Open Device Manager.
  3. Right-click (or tap and hold) the name of the device, and then select Uninstall.
  4. Restart the computer.

When it restarts, Windows will try to reinstall the device by using the device-specific driver.

Dec 21, 2020 • Filed to: USB Recovery • Proven solutions

Have you ever had difficulty connecting your devices to your computer using a Prolific USB to Serial adapter? If yes you are lucky to find this page, it will give you all the information need to fix an unresponsive Serial driver adapter. You may have noticed a yellow exclamation mark hovering over or beside the USB to Serial Driver when searching your Device Manager and if you have we can all agree that it signifies a prevailing problem.

Bluetooth

Overview of the Error

If you are not able to connect your device to your PC using a USB to Serial adapter it may be that

  • The USB driver is outdated
  • The USB Driver is missing
  • Or even a corrupted driver

While you can't be so sure what the exact problem is there are solutions you can adopt to fix the issue once and for all. Read on to find quick fixes to resolve the problem.

1# Fix Prolific USB to Serial Driver not Working

Solution: Roll your Prolific USB to Serial Driver back to an older version

Updating your drivers often work wonders for your system because it makes sure that it runs on the latest features that guarantee maximum functionality. Unfortunately updating your drivers can cause this kind of error especially if your latest update does not work too well with your hardware. Once you upgrade your PC to the latest Windows version your Prolific USB to Serial Driver also updates to the latest driver software and if the driver is not compatible with your Hardware issues may arise. To correct the error, you will have to download the driver again by following these steps.

  • Right-click on your PC Start button and open Device Manager
  • Double click LPT and COM ports then locate the Prolific USB to Serial Driver and right-click it so you can select Update Driver
  • For driver software click My computer
  • From My computer select 'Let me pick from a list of drivers available'
  • Choose an older version from the list then click Next
  • The driver you selected will be installed automatically
  • Once it has been downloaded reconnect the driver to see if it works.

Drivers Hokuyo Automatic Port Devices Bluetooth

2# Fix Prolific USB to Serial Driver 'Coder 10'

Driver issues reveal themselves in so many ways or through messages such as

  • This device will not start (Code 10)
  • There is no driver installed in this device
  • The driver was not successfully installed

A code 10 error may arise because the chip you are using is not an original one. If you are using a fake, the manufacturer has a way of disabling it due to copy write infringement and the copy write takes effect once you download a recent update. To protect your PC from getting this code, you will have to make sure that your Windows 10 never updates a driver without approval. Updates come in the form of 64 bit and 32-bit drivers. Below we will show you how to work your way around the problem.

Window 64 bit Fix

To fix Windows 64 bit OS including Prolific USB to Serial Adapter, follow through these steps.

  • Download 'PL2303_64bit_Installer.exe and Save
  • Remove every USB to Serial adapter from your PC and double click the 'PL2303_64bit_installer.exe
  • Follow the prompt by plugging in one USB to Serial adapter the click on Continue
  • Reboot your PC to get Windows up and running

If you have followed these process through and you still see the same error go to your device manager

  • Open the control panel and navigate to Device Manager
  • From your control panel navigate to the System category and click the Hardware tab
  • Scroll to the LPT/COM port and double click Prolific USB to Serial Comm Port
  • Click Drivers in the Properties section
  • The Driver you choose should read '3.3.2.102 with an appropriate date attached
  • If the date is wrong then it means the wrong driver was installed
  • Unplug the Serial adapter and run the steps again to install the correct driver

Window 32-bit

For Windows 32-bit OS systems follow these steps

  • You will have to download the 'PL-2303_Driver_Installer.exe and save from Microsoft download link
  • Run the program and eradicate the driver if you can
  • Run the installer once more to install a correct driver

Drivers Hokuyo Automatic Port Devices For Sale

To Troubleshoot for error if your device still does not work

  • Go to Control panel, enter System to access your Device Manager
  • Scroll down to the LPT/ COM port then double click Prolific USB to Serial Comm Port
  • Click Driver in the Windows Properties section
  • The driver must be numbered as '2.0.2.8' and dates accordingly

Drivers Hokuyo Automatic Port Devices Download

If the driver was not installed, remove the Serial adapter then run 'PL2303_Driver_Installer.exe' again. Follow directions in Device Manager to download the correct driver

The three solutions listed in this article have proven to be quite helpful in fixing a Prolific USB to Serial driver not working on Windows 10. They may appear confusing at first but if you follow each step in detail you can resolve the issue.

Drivers Hokuyo Automatic Port Devices Gigabit

Video Tutorial on How to Fix USB Device Not Recognized

USB Solution

Recover USB Drive
Format USB Drive
Fix/Repair USB Drive
Know USB Drive